Wheel & Axle Dynamic Weighing System

Product Introduction:
HY-101E is made of aluminum alloy ,and it is ultra thin, light and portable. Compared with other products, the foldable plastic slope greatly improve measureing dynamic accuracy. The netweight is 23 kg, and the length of weigh-bridge is changed to 800mm from 700mm. One HY-101E can statically or dynamically measure wheel weight, so double can be parallelly connected to measure axle weight. And the instrument, which is connected, can calculate the vehicle weight.

Specification:
Rated load: 20t, 40t
Static comprehensive error:0.1~0.5%FS
Error on transverse:0.2%FS
Dynamic comprehensive error: 1.5%FS（1~5km/h） 3~5%FS（5~10km/h）
Rated output: 0.7±0.1mv/v
Zero Balance: ：≤1%FS
Non-linearity: 0.2%FS
Defend Grade: IP67
Repeatability: 0.05%FS
Ultimate overload: 150%FS
Output resistance: 1000±3Ω
Use temp. range: ：-30~80℃
Compensated temp. range: ：-10~50℃
Temp.effect on span: 0.03%FS/10℃
Temp.effect on zero: 0.05%FS/10℃
Recommended voltage:10V
Excitation voltage:9-15V
Max load of 1/4 weigh bridge: 8t
Full load:20 t
Insulation resistance: ：≥5000MΩ（100VDC）
Dimension of the surface: 800×350mm Netweight:23kg

Dimension: